Zettex X45 EPDM pond liner contact adhesive

The Zettex X45 EPDM pond liner contact adhesive is for bonding all types of substrates. Due to the very high solids and rubber content, this Zettex X45 EPDM pond liner contact adhesive is extremely strong and safe to use. The Zettex X45 EPDM pond liner contact adhesive is also suitable for bonding plasticizer-sensitive substrates as well as PVC. The maximum proportion of plasticizers in PVC must not exceed 16%. We recommend testing before using Zettex X45 EPDM pond liner contact adhesive.

 

- Contact adhesive for bonding EPDM pond liners to various substrates such as wood or masonry

- is suitable for use with EPDM pond liner

- perfect as an assembly aid for laying pond liner on steep pond walls

- Spray the pond liner and the area to be glued with Zettex X45 EPDM pond liner contact adhesive and glue both surfaces together after a flash-off time of 2-4 minutes

- Material consumption: approx. 70 ml per m²

- All surfaces must be dry and free of grease and dust

 

- Processing temperature: +5 to + 40 ° C

- Temperature resistance: -40 to + 140 ° C

- Consumption: 60-70 ml / m²

- Open time: 4-6 minutes

- Solids: 45%

- Color: amber

- Spray pattern: weave pattern

- VOC: 544 g / liter

 

Make the materials to be bonded dry and free of dust and grease. Shake the spray can well before use. Then spray the Zettex X45 EPDM pond liner contact adhesive on the surfaces to be bonded.

A distance of 30 cm between the surface and the aerosol is perfect. The adhesive strips should preferably be applied without an overlap. After 2-4 minutes, glue the two surfaces together and press or roll on firmly. In the case of overlapping applications, at least double the open time. If the surface is very porous, check carefully whether there is sufficient contact between the two layers of adhesive. If necessary, apply an additional layer of Zettex X45 EPDM pond liner contact adhesive. The drying time is at least 2 minutes at 20 ° C.

        Danger