Nitrate resin pond water care

The problem with many koi ponds is that there are hardly any pond plants available to break down nitrates in the koi pond. The attempts to use nitrate filters in the koi pond failed because there is no oxygen-poor, anaerobic climate in koi ponds. With the nitrate resin pond water care we can offer you an agent which really only removes nitrate from the pond water.

 

SR8 is a nitrate-selective, strongly basic, macroporous anion exchanger and only removes nitrate. Even with a very low nitrate value, no other substances are removed from the pond water. In contrast to conventional nitrate resins, the pH value does not change. SR8 is preferably used to remove nitrates from drinking water. Here, the nitrate ions, which are harmful to health, are exchanged for harmless chloride ions. The nitrate resin pond water care can be regenerated without hesitation, it has a shelf life of many years. 1 liter of nitrate resin pond water care can remove up to 30 grams of nitrate from the pond water.

 

Bring the filter media bag with 4 liters of SR8 nitrate resin pond water care to a point of the koi pond or pond filter where a good flow of the resin is guaranteed. The SR8 nitrate resin pond water care is very fine-grained in the size of 0.4 to 0.6 mm, the filter bag must be matched for this fine grain.

A regeneration of the SR8 nitrate resin pond water care is done with 200 g - 250 g table salt in 2 liters of warm water approx. 40 ° C per liter of nitrate resin. During regeneration, the resin must lie in a current for 10-12 hours so that the nitrate can be easily exchanged. Then the SR8 Nitrate Resin Pond Water Care must be rinsed out with clear water.

If you build a bypass for this application, you can measure even more effectively whether the pond water that comes out of the SR8 Nitrate Resin Pond Water Care no longer contains any nitrate. If nitrate can still be detected, the SR8 Nitrate Resin Pond Water Care must be regenerated. If you put the filter media bag in the koi pond or pond filter, you can only measure the total amount and you will not quickly know when the SR8 nitrate resin pond water care product needs to be regenerated.