Koi pond protein skimmer Berlin 400

With this koi pond protein skimmer Berlin 400 we offer a perfect professional device, which is suitable for koi ponds up to 100,000 liters. Due to the very high water throughput of up to 20,000 liters per hour, this koi pond protein skimmer is suitable for large ponds and fish farms with very high loads. The koi pond protein skimmer Berlin 400 is made entirely of PE and is therefore 100% independent of the weather and temperature. The PE material is impact-resistant and also UV-resistant.

 

With the help of a small air pump or an outlet of the normal ventilation with approx. 2.5 liters per minute, air is fed into the Koi pond protein skimmer Berlin 400. This introduced air mixes with the inflowing pond water, which flows over drip bodies. The foam is separated from the water flow by a specially milled perforated plate and rises upwards. Substances dissolved in the pond water are attracted by the surface tension of the air bubbles. Chemicals, dirt particles or dyes are concentrated by this attraction and result in the foam.

 

- stabilizes the pH value

- Removes dyes, dirt particles and protein compounds

- Oxygen content in the water increases

- serves to prevent diseases through much better water quality

- the koi pond protein skimmer Berlin 400 is not dependent on bacteria and works immediately when you switch on the pump

- further improvement by adding ozone up to 1000 mg

 

- Height 120cm

- Diameter 40cm

- Weight 32kg

- Water inlet Ø 50 mm

- Water drain Ø 110 mm

- Dirt drain Ø 63 mm

- Pump capacity 10 to 20 m³ per hour

- Air hose inlet 4 mm

- Material: PE, weather-resistant down to -40 °C

- Air intake by pump 2.5 liters per minute

- Ozone feed is possible up to 1000 mg

 

 

The required air pump is not included in the scope of delivery.