Professional impeller pond sludge cleaner with stone separator

We can now offer you the professional impeller pond sludge extractor with stone separator made of stainless steel. The professional impeller pond sludge extractor with stone separator prevents stones in the pond from destroying the impeller during pumping. The delivery rate is around 5000 liters per hour and is suitable for koi ponds and swimming ponds up to 75000 liters. The professional impeller pond sludge extractor with stone separator is particularly suitable for removing sludge, leaves and thread algae in the pond and has successfully passed tests on koi ponds with a perfect. The professional impeller pond sludge extractor with stone separator pump is not suitable for very strong contamination in the pond, such as poorly flowing sludge, leaves, branches. Do you have stones on your pond floor? This is no longer a problem with this professional impeller pond sludge cleaner with stone separator! With this model variant, stones that are sucked in are simply caught in the stone cutter. This can then simply be emptied at a later point in time. As an accessory, we supply the matching connection set in stainless steel with a 38 mm hose nozzle. There you can simply install a swimming hose and use a telescopic handle to remove dirt from your koi pond in a very short time. The professional impeller pond sludge extractor with stone separator has a pump housing and a chassis made of stainless steel.

 

The professional impeller pond sludge extractor with stone separator is suitable for pumping clear liquids with stone content. For heavy soiling such as poorly flowing mud, leaves,

The professional impeller pond sludge extractor with stone separator is absolutely not suitable for branches. The stone separator on the pump prevents unsuitable solids from entering the pump housing. In the case of heavily muddy koi ponds or swimming ponds, make sure that the sucked in amount of stones, leaves etc. does not clog the stone separator. It has to be checked that the pump delivers enough water and the stone separator has to be cleaned regularly. For cleaning, remove the union nut with the corresponding blind cone and any stones that may be present fall out downwards. Then the thread of the union nut and the external thread of the stainless steel cylinder must be cleaned, the sheet metal blind cone put on and tightened with the union nut. The suction line should be kept as short as possible and not exceed a length of 10 to 12 m. The pump is dry self-priming, although running dry for more than 20 to 30 seconds can damage the impeller. With the maximum hose length mentioned above, the pump will suck up liquid after a maximum of 10 to 20 seconds. We recommend an internal hose diameter of at least 32 mm on the hose and pressure side, 38 mm is even better.

 

- Motor: 230 V / 0.75 kW

- Delivery rate: 5000 liters / hour

- maximum pressure: 3.5 bar

- Weight: 20 kg