Pond heating tape digital

The professional pond heating tape has a digital control that can be set to 1 ° C. No overheating in case of overlapping, digital controller in IP 65 control housing, these are only a few of the most important features for the digital pond heating tape.

 

The self-limiting parallel heating band for Koi pond heating consists of two tinned copper conductors approx. 1.2 mm. In addition, this core element is surrounded by an insulating sleeve and a protective braid made of tinned copper braid with a resistance of maximum 0.0180 hm / m in accordance with VDE 0254. This considerably increases the mechanical strength of the pond heating tape. The professional pond heating tape thus fulfills all the latest international standards. An outer jacket made of heat- and chemical-resistant plastic is applied over the protective braid, which serves as corrosion protection for the braiding and contact protection for the entire system. The professional pond heating tape digital is designed according to the contour of the pond. The self-limiting characteristics of the Profi Teich Heizband digital prevent overheating, even if there is an overlap.

 

The energy consumption of the system is sensibly limited by a regulation. The electronic controller, with a large LED display, is easily adjustable, but built into a closed housing with protection class IP 65 in order to avoid unintentional adjustment of the set temperature. With the 4 meter long temperature sensor you are able to determine the correct measuring point in the pond. It only has to be avoided that the temperature sensor lies on the pond heating tape. Everything about this pond water heating system is pre-assembled and ready to plug in, so that only the pond heating tape has to be laid, the temperature sensor placed and the temperature set after plugging in the waterproof plug. The pond heating system is now ready for operation.

 

The pond heating tapes are made to measure. Calculate per 10,000 liters with 10 m of pond heating tape. The energy requirement for continuous operation is 40 watts per meter x pond heating tape length.