Elecro Koi pond heater digital pond heater

The professional Elecro Koi Pond Heater digital pond heater, which was specially developed for Koi ponds in a comprehensive version. Elecro Koi Pond Heater digital pond heater is the most reliable model on the market that is currently available.

 

- Digital temperature control from 0 to 40 ° C with 0.5 ° C control levels and display

- the heating element is made of titanium

- Housing made of stainless steel BS316

- Including an internal flow switch that switches off the pond heater when the flow rate is too low

- Thermal fuse if the flow rate is too low

- Pressure up to 4 bar

- Connection with 1.5 "internal thread

- the minimum flow is around 1,000 liters per hour

- the maximum flow rate is 17,000 liters per hour

 

The Elecro Koi Pond Heater digital pond heater is supplied without a power cord and plug.

 

 

! Importantly, the 3 KW pond heater requires a socket with a 400 volt supply line!

 

 

Two couplings with 50 mm connection and 2 hose nozzles 32 / 40mm are included. It is one

Wall mounting or floor mounting of the pond heater possible with a swivel base. This Elecro Koi pond heater digital pond heater is one of the industrial devices. Industrial devices are supplied without a plug. Have an authorized electrician install the Elecro Koi Pond Heater digital pond heater. The Elecro Koi Pond Heater digital pond heater must be installed in a dry and weatherproof housing.

 

Caution: If the heater is not used during the winter months, the water must be drained out to prevent frost damage.

 

 

- Heating element: titanium, high MgO compression

- Flow tubes: BS 316 stainless steel

- Temperature regulator: 0 - 40 ° C

- Thermal safety shutdown: 55 ° C (manual reset)

- Flow switch: Gold-tipped reed switch with titanium hinge pin

- Circuit: High temperature resistant, silicone-sheathed, multi-strand copper conductor

- Switching device: Schneider

- Seals: high temperature resistant polymers with a special composition

- Water connections: 1.5 inch BSP internal thread

- Working pressure: 4 bar maximum

- Dimensions (length x width x height) 462 x 160 x 220 mm